Arctic Ozone

Now, maintaining pristine, purified water in your spa has never been easier!
Ozone is perhaps nature’s most powerful purifier. It is widely used to purify drinking water because it is pH neutral, chelates metals and destroys pathogens and other organic contaminants quickly and with no residual chemicals remaining in the water. Despite ozone’s (O3) great potency, nearly all systems on spas utilize designs that fail to address the critical components needed for successful water purification. These components are:

1)	Concentration of Ozone
	You must produce enough ozone at high concentration to purify and you must do so year after year without significant change in ozone output. (All UV systems degenerate output significantly after just 100 hours of use!)
2)	Contact Time
	The Ozone must come in contact with the contaminants and have enough time to react.

Corona Discharge System: An ozone system far ahead of most on the market. Unlike many Ozonators that suffer production problems because of burnout, the Arctic CD ozonator has an inexpensive cartridge that can be easily changed every couple of years to maintain maximum ozone output. Our balance Barometer both protects the ozonator and helps to concentrate the ozone before it is introduced through the Mazzei™ injector. The water then flows through a reaction chamber being purified before return to the spa.

Peak Ozone system™

---

The Peak Ozone system™ picks up where our CD system left off and takes it to the next level.
We begin with a Cold Cathode Corona Discharge Ozone Generator that is certified to produce 0.5 g/hr of ozone at a high concentration flow rate of 1.25 - 2 l/min. To ensure we have as much of the ozone mixed into solution as possible, we force it through a patented Mazzei™ Injector. This pushes the ozone into a vacuum where the molecules are shattered into fragments smaller than water particles. Approximately 80 percent of the ozone will be mixed into solution as a result of this process. Next, the ozone is kept in solution for a minimum contact time of 18 seconds to allow it to oxidize organic contaminates from the impure spa water. This is done by forcing the water through our Static Mixing Chamber. This special chamber utilizes the latest in mixing technology within the Tri-Pac Reaction Zone. The goal here is to increase contact time by slowing down the water flow, further mixing the ozone and facilitating a reaction.A small percentage of ozone gas will remain out of solution and this we need to isolate and neutralize. The Peak’s Off-Gas Chamber accomplishes this by allowing undissolved ozone to rise naturally to the top of this chamber, where it is pulled through the Off-Gas Destruct Filter. This catalytic filter converts the ozone back to pure oxygen.The science behind the Peak Ozone System™ may seem complex, but the results are amazing and the maintenance for you, the spa owner, is virtually non-existent. For Peak performance in water maintenance, choose the Peak Ozone System™, available only with Arctic Spas.